玉林Ws-200 turbine mill

Working principle:

The crushing chamber of this machine is composed of shell, door, spindle, turbine assembly, screen assembly, feed hopper and discharge pipe and other components. It mainly uses the eddy current produced on the back of turbine blade to complete the crushing of materials. When working, the motor drives the spindle and turbine to rotate at a high speed. Because there is a small gap between the turbine and the tooth block on the screen ring, the material entering the mechanism is ground again in the gap of the rotating airflow. In this process, the turbine absorbs a large amount of air, playing the role of cooling the machine, abrasive and conveying fine powder. The difference is that a certain number of moving needles and static needles are added to the turbine and the door respectively to achieve the purpose of pre-crushing materials into the crushing area. At the same time, a plane ring is added on the door which is consistent with the outer side of the blade end face to avoid the coarse particles not fully crushed out of the crushing chamber. Material crushing fineness depends on the nature of the material and the aperture of the screen and the amount of material and air through;

Performance characteristics:

1, the machine has the characteristics of compact and reasonable structure, stable operation, convenient installation and maintenance (without foundation), small footprint, large production capacity, no dust pollution and so on;

2, crushing ratio is large, usually input raw material within 10mm, crushing fineness is adjustable in the range of 20-325 mesh;

3, when the equipment is working, the air volume is large and the self-cooling function is good, so it can also be applied to some heat-sensitive materials;

4, the machine is a high-speed turbine crusher, high efficiency, crushing capacity per unit power, so the operation cost is low, the whole system configuration is reasonable, one-time investment cost is low;