Mechanical micro-crusher

The company is a professional powder technology equipment manufacturing science and technology entity, mainly engaged in a series of mixer, air mill, mechanical mill, air classifier and transportation, dust removal supporting products research and development and production.

Company mechanical micro-crusher:

The upper part of the mechanical micro-mill is composed of an independent turbine classifier with grading device and the lower part of the crushing unit equipment composed of impact hammer and tooth plate. Its feed mode, the nature of the material by the feed and feed two, feed raw materials by the star on the valve by the classifying chamber inclined tube into the crushing chamber, the impact of the impact hammer JiJu, at the same time and the shear and friction between tooth plate, collision, crushed particles of classification in accordance with the air currents to rise to the grading chakra periphery, coarse particles return to crushing chamber to smash with gravity. The fine powder that meets the fineness requirement is collected outside the exhaust pipe of the classifier. For the material with good fluidity and small specific gravity, it is directly entered into the crushing chamber through the suction outlet at the bottom of the crushing chamber, which can improve the crushing effect.

Working principle of mechanical micro-crusher:

1. This machine integrates mechanical crushing and airflow grading, which is a compact and functional combined crushing unit. Easy installation of equipment (no foundation), small footprint.

2, depending on the nature of the material, usually input raw material particle size of 3mm, product particle size D97 - in the range of 5150μ m can be adjusted, crushing ratio, high efficiency, continuous operation.

3. The impact hammer and toothed village circle of the crushing chamber are made of special wear-resistant materials, which prolong the service life.

4. The equipment has large air suction and good cooling effect, so it can also be applied to some heat-sensitive materials.

5, this equipment is a high-speed impact crusher, crushing capacity per unit power is large, so the operation cost is low, the whole system configuration is reasonable, - secondary investment cost is low.

Scope of use:

This machine is suitable for chemical, mineral, building materials, electronics, pharmaceutical, pesticide, paint, dye, light industry, food, metallurgy, feed and other industries. Dry crushing and grading of all kinds of organic and inorganic matter

Technical parameters:

Process diagram:

The company has been successively awarded the honorary titles of "2010 Top Ten Pesticide Equipment Model in China", "2011 Top Ten Pesticide Equipment Pacesetter in China", "2011 Top Ten Provincial and municipal Agricultural Support Pacesetter in China", "2012 Top Ten Trusted Pesticide Equipment Supplier in China", etc. The company has passed ISO9001 international quality system certification, A-level contract abiding and keeping promise enterprise certification and AAA credit rating certification. After years of entrepreneurship and development, it has formed three series of products with new varieties, complete specifications and excellent quality.

Shanghai three powder equipment co., LTD. Production of mixer, jet mill and mechanical crusher and air machine and conveyor, dust removal products, widely used in chemical industry, lithium batteries, pesticide, pharmaceutical, pigment, dyes, plastics, food, feed, energy, new materials such as powder preparation industry of different areas, can greatly improve the grades and value-added products, There are obvious economic and social benefits. The company also has a complete test processing device and testing means, welcome new and old customers to test or processing products, hua SAN powder will give you quality products and satisfactory service; Hua three people are willing to cooperate sincerely with new and old customers, build friendship, and develop together!