What are the use of air flow ultra-micro mill

At that time, because of its high fineness of the finished product, the airflow grinder can be combined with the cyclone separator, dust collector and induced draft fan to form a complete crushing system. Therefore, it has a very wide range of application, and is often used in the pharmaceutical and biochemical places with high requirements for purity. It also has a high utilization rate in the crushing and grading processing of some inflammable, explosive and oxidized materials. So today, like chemical, mineral, metallurgy, abrasive, ceramics, refractories, medicine, pesticides and other industries are inseparable from the airflow crusher.

What are the features of the jet mill? Why else would it be so widely used on these occasions?

Because the control system of the airflow mill is controlled by the program, the operation is also very simple.

And the whole system of airflow crusher closed crushing, less dust, quite low noise, so in the whole production process is easier to clean environmental protection work.

Airflow crusher can be used in series with multi-level classifier to produce multiple particle size products at one time.

Airflow crusher is mainly suitable for crushing mechanism determines its wide range of application, high fineness of finished products, typical materials are: super hard diamond, silicon carbide, metal powder, etc., high purity requirements: ceramic color, medicine, biochemistry, etc., low temperature requirements: medicine, PVC. By changing the common air in the gas source part to inert gas such as nitrogen and carbon dioxide, the machine can become inert gas protection equipment, suitable for the crushing and grading processing of inflammable, explosive and oxidized materials.

Air mill and cyclone separator, dust collector, induced draft fan composed of a set of crushing system. Dry compressed air is filtered through the high-speed laval nozzle jet into the crushing chamber, in high-pressure air more than the intersection of the material being repeated collision, friction, shearing and crushing, after crushing material with the updraft movement under the action of a draught fan to grading, rotating at high speed the classification of turbine under the action of the strong centrifugal force, make the thickness of material separation, The fine particles that meet the particle size requirements are collected by cyclone separator and dust collector through the classification wheel, and the coarse particles are dropped to the grinding zone for further grinding. Z after the airflow grinder product particle size is 8 to 150 micron adjustable, so its grain shape is good, particle size distribution is relatively narrow, this is obvious!