Eight steps teach you how to install a wood crusher
1. At work, we should always pay attention to the operation of the branch grinder, and the feeding should be average to prevent blocking and stuffy cars, and do not overload tasks for a long time. If it is found that there is vibration, noise, bearing and machine temperature is too high, spraying material and other sights, it should stop immediately to reflect on the problem, cleaning up the sustainable task ahead.
2. Wood pulverizer grinding blade is an important wearing part. After wear, whether the edges and corners are exchanged in the same direction or the corners and corners are changed around, the whole set of hammers should be exchanged at the same time. Screen is also vulnerable parts, such as local screen damage, can be riveted, serious damage to replace the screen.
3, after starting, first make the equipment idle for 2-3 minutes, reflect on whether the rotor steering is correct, whether the sound is normal. As long as the extra speed under the jolting rotation after the task.
4, micro operation personnel do not wear gloves, attack infarction, it is forbidden to put your hand into the stuffing bucket, feeding should stand in the front of the crusher, in order to prevent rebound debris injury face, do not stop immediately after the task is finished, should be idling for 2-3 minutes, in order to let the machine material completely discharged. Stop cleaning and maintenance after shutdown.
5, the material crushed by wood flour machine should be carefully checked, not mixed with stones, metal and other foreign matters, so as not to damage the machine. When the machine is running, the operator shall not bid farewell to the unit, nor disassemble the machine to see the task condition in the crushing room during operation, and the maintenance tools shall not be placed on the machine or the packing.
6. How to install the crusher? Wood powder machine should be fixed operation, should be fixed on the cement base. If the task location is frequently changed, the wood flour machine and motor should be installed on the frame made of Angle iron. If the wood powder machine is powered by diesel engine, the power of the two should be corresponding, that is, the power of the diesel engine is slightly greater than the power of the wood powder machine, and the pulley groove of both. The outer end face of the pulley should be on the same solid.
7, wood flour machine operation after 300 hours, to clean the bearing, change the oil. Take off the belt when parking for a long time.
8. What matters should be paid attention to when installing wood crusher? Before starting the machine, it is necessary to check whether the local connecting bolts of the wood flour machine can be tightened, whether the tightness of the transmission belt is suitable, and whether the power line is good; Whether the motor shaft and the wood powder machine shaft can be parallel; Check whether the pulverizing blade of wood flour machine is good, whether the aperture of screen block is suitable, and whether there is damage. Drag the belt by hand, reflect on whether the spindle rotation is sensitive, whether there is a jam, collision and friction scene.
Shanghai Huasan Powder Equipment Co., LTD
Contact person: Manager Zhu
Tel: 021-57460338/57460358/57468812
Mobile phone: 13818804871/18017628352
Fax: 021-57463615
Email:sales@huasanpowder.com
Address: No.33 puzhuang Road, Zhuanghang European Industrial Park, Fengxian District, Shanghai