Is the shredder really a fully functional shredder?

Is the shredder really a fully functional shredder? Is it true that all materials can be shredded? Here we take the question to understand the crusher.

The crusher is made of 304 stainless steel, supporting national standard motor, mainly used for crushing chemical materials, Chinese medicinal materials including roots, branches and massive materials, all kinds of cereals with low oil content and some other hard and brittle materials. The machine uses the relatively high speed operation between movable tooth plate and fixed tooth plate, so that the crushed material can be crushed by the impact and friction of tooth plate and the collision between materials. Pulverized material can be directly discharged from the grinding chamber, through the discharge port, general materials after grinding to be collected through the cotton bag, pulverized material collected in the bag, air from the small holes in the bag, will not be fine powder discharge, so as to play a waste, no pollution effect. The particle size is determined by the replacement of different mesh screens.

The machine is simple in structure, firm, smooth in operation, fast and even in crushing materials, and good in effect. The machine is made of stainless steel, all the grooves in the shell (crushing groove) are machined by precision so as to achieve smooth surface and easy to clean, which changes the phenomenon of rough inner wall, easy to collect powder and difficult to clean, so that the production of food, medicine and chemical industry can meet the standard and meet the hygienic requirements of GMP.

Pulverizer is not capable of crushing flammable, explosive items, pulverizer is no exception. If there is a material too hard, like metal can not be crushed. There is another is to pay special attention to oily materials. Grinder is not suitable for crushing high oil content (such as sesame, walnut, melon seeds, rapeseed, etc.), viscous materials, because of high oil content and viscous materials are easy to block the screen. Of course, water cooling devices can also be installed according to the special requirements of users and the special physical and chemical properties of the crushed materials. For melting point, soft and sticky materials, resulting in reduced crushing effect or unable to crush, and even cause combustion and explosion, it is necessary to install water cooling device on crushing equipment. Even if equipped with water cooling device, the crusher is not suitable for crushing material with high oil content. The purpose of the water cooling device is to reduce the temperature of the comminution chamber!

Contains a little oil or can be, but when crushing, we should pay attention to a dosage should not be too much, and after the material is completely crushed and then feeding, can prevent material blocking screen. If the screen is blocked, please disconnect the power supply and clean up the screen before crushing. No crusher is omnipotent, including a crusher. Its omnipotence, mainly it can adapt to most material crushing, and are quite good effect!