吕梁JF500 shear mill

Working principle:

The crushing chamber of the machine is composed of a moving plate mounted on the body and a static plate mounted on the machine door. There are many special shape grooves in two moments on the moving disk and the static disk respectively. When the moving disk rotates at a high speed, the blade of the tooth ring on the moving disk moves relative to the blade on the static disk, forming a huge shear force. Material from the stator center after feeding tube into the machine, the feed under the action of centrifugal force produced by the rotation of the blades, quickly into the crushing chamber outward movement of material will be at the same time, along with the rotation of the knife dish do circular motion, when after many cutter tooth wound have to move forward, as a result of the cutter gap decreases gradually from center to the outer edge, part of the material with the airflow through the tooth clearance, After being cut and crushed, after so many grooves, the material gradually becomes fine, and finally achieves the purpose of refining the material. The finished product is discharged from the lower discharge pipe and collected. The fineness of crushing is related to the speed, tooth shape, the clearance of the blade and the time of the material staying in the crushing room. Changing the above parameters can change the granularity of the finished material;

Performance characteristics:

1. The cross-sectional area of the crushing chamber is quite small, and the crushing plate is vertically arranged, so it is suitable for crushing heat-sensitive materials. ;

2. The machine has high grinding speed and wide shearing area, so it has large production capacity and fine particle size of finished products.

3. It is convenient to adjust the axial clearance of the dynamic and static cutter head, so the fineness of the product is easy to adjust and control;

, the machine has compact structure, smooth operation, simple operation, convenient installation and maintenance, small footprint, wide application range;

Scope of use:

Around the machine is suitable for processing mohs hardness level 3 and a half the heat-sensitive can crush materials of hard, impact resistant, can be used for ductile materials such as plastic, rubber, paper pulp, fur, especially suitable for PVC, PE, PET, PC, LDPE, HDPE and other materials, widely used in powder coating, hot melt adhesive, plastic, spinning, rolling forming industries of plastic pieces;

Technical parameters:

[Note: Parameter is subject to Chinese]