南宁Horizontal screw belt mixer

Summary:

Horizontal screw belt mixer is composed of u-shaped container, screw belt mixing blade and transmission parts. The spiral strip blade is generally made of double or three layers. The outer spiral gathers the material from both sides to the center, and the inner spiral conveys the material from the center to both sides, forming convective mixing. The screw belt mixer has a good effect on the mixing of viscous or condensed powder and the mixing of liquid and paste materials in the powder. The barrel cover can be made into a fully open door, so that the equipment can be cleaned and replaced.

Structural features:

1. Drive advantage

The standard product is driven by a belt pulley driven cycloidal reducer. Compared with the large torque of the gear reducer, the elastic connection of the belt transmission has the advantage of protecting the transmission parts in overload.

2. Flexible disassembly and assembly

The screw belt spindle is connected with the drive shaft flange in simplified form, which can be quickly removed in case of maintenance or replacement of mixing shaft type. Flexible disassembly design makes the U-shaped simplified and the two ends of the plate completely welded, avoid the simplified large flange connection caused by the accumulation of material gap, reduce residual.

3. Split screw belt

Compared with the continuous type screw belt, the shearing motion of the broken screw belt is larger, and the material can form more eddy currents in the flow, which speeds up the mixing speed and improves the mixing uniformity. .

4. Discharging form

Discharge form - generally pneumatic (manual) flap valve, circular arc valve is tightly embedded in the simple, flush with the simple inner wall, no material accumulation and mixing dead Angle phenomenon, reliable side seal, to ensure that there is no leakage phenomenon in frequent switches.

5. Cooling and heating

A jacket is added in the outside of the mixer barrel, and the material is cooled or heated by injecting hot and cold medium into the jacket. Cooling - general pump into industrial water, heating can be steam or electric heating heat conduction oil.

6. Spindle sealing

When mixing superfine powder, the sealing form of spindle can increase the airtight setting, which can effectively prevent the flow of air powder inside and outside the cylinder.

Technical parameters:

Note: 1. The mixing quantity in the table is measured by the powder with material bulk density of 1. The selection should be calculated according to the mesh, material bulk density, fluidity and other parameters of the product.

2. In case of high temperature, high pressure, inflammable, explosive, corrosive, viscous and other working conditions, detailed data must be provided for further selection and customization. 3. Data and pictures are subject to change without prior notice.

4. This table does not cover all products. For more information, please contact our sales engineer.