Weightless biaxial blade mixer (WZL)

Summary:

Gravity free dual-axis blade mixer has the characteristics of strong, efficient, short mixing time, design mixing time 1-3 minutes, 1:1000 ratio uniformity is greater than 95%. The two stirring shafts in the horizontal cylinder rotate at the same speed, and the blades arranged at a special Angle on the shaft ensure that the material moves in radial, circular and axial directions, forming a compound cycle, and achieving homogenization and mixing in a very short time.

Structural features:

1. Mixing effect: even if the material has the difference of specific gravity and particle size, it can achieve a good mixing effect under the rapid and violent tossing of staggered mixing blades.

2. Crushing device: When the material clumps, it is necessary to add crushing device. The "crushing bar" with triangular tooth cover keeps the high speed above 1400rpm to crush and depolymerize the material in the material weightlessness zone.

3. Discharging form: discharging form is generally pneumatic (manual) flap valve, circular arc valve is closely embedded in the cylinder, flush with the inner wall of the cylinder, no material accumulation and mixing dead Angle phenomenon; Standard type has big door small door, big door opening to the side of the cylinder, feeding clean and fast, less residue.

4. Two-piece blade: in order to reduce the replacement cost of the wearing parts of the equipment, the blade blade can be made into two pieces. A movable small blade can be placed on the blade base to replace the worn small sheet directly, which is economical and fast.

5. Clearance between blade and cylinder: the clearance between blade and cylinder wall directly affects the mixing effect and residual material of the body after discharging; The clearance between blade and cylinder of our company is controlled in 3-5mm.

6.20 cubic meters full volume: this series of mixers can reach 20 cubic meters full volume at most. For large-size equipment, transmission form and mixing base are very different from ordinary specifications.

Technical parameters:

[Note: Parameter is subject to Chinese]