张家界Horizontal screw belt mixer (WLDH)

Summary:

Horizontal mixing machine - horizontal screw belt mixing machine is composed of u-shaped container, screw belt mixing blade and transmission parts; The spiral strip blade is generally made of double or three layers. The outer spiral gathers the material from both sides to the center, and the inner spiral conveys the material from the center to both sides, forming convective mixing. The screw belt mixer has a good effect on the mixing of viscous or condensed powder and the mixing of liquid and paste materials in the powder. The barrel cover can be made into a fully open door, so that the equipment can be cleaned and replaced.

Structural features:

1, driving advantages: standard products are driven by belt pulley cycloid reducer, relative to the large torque of gear reducer, the elastic connection of belt transmission has the advantage of protecting transmission parts when overloading.

2. Flexible disassembly: the screw belt spindle is connected with the flange of the driving shaft in the cylinder body, which can be quickly disassembled when the mixing shaft type needs to be repaired or replaced. The flexible disassembly design makes the U-shaped cylinder completely welded with the plates at both ends, avoiding the gap of the accumulated material caused by the connection of the large flange of the cylinder and reducing the residue.

3, the broken screw belt: the broken screw belt relative to the continuous screw belt, the shear movement of the material is larger, and can make the material in the flow of more eddy current, accelerate the mixing speed, improve the mixing uniformity.

4, the discharge form: the discharge form is generally pneumatic (manual) flap valve, circular arc valve tightly embedded in the cylinder, flush with the inner wall of the cylinder, no material accumulation and mixing dead Angle phenomenon, reliable side seal, to ensure that there is no leakage phenomenon in the frequent switch.

5. Cooling and heating: jacket can be added in the outside of the mixing barrel, and the material can be cooled or heated by injecting hot and cold medium into the jacket; Cooling is generally pumped into industrial water, heating can be through steam or electric heating heat conduction oil. 6. Spindle sealing: when mixing superfine powder, the sealing form of spindle can increase the airtight setting, which can effectively prevent the flow of air powder inside and outside the cylinder.

Technical parameters:

[Note: Parameter is subject to Chinese]