Future direction of horizontal mixer

Horizontal mixer is composed of u-shaped container, screw belt mixing blade and transmission parts. The U shaped long cylinder structure ensures the small resistance movement of mixed materials (powder and semi-fluid) in the cylinder. Positive and negative rotation ribbon is installed on the same horizontal axis, forming a low power efficient mixed environment, spiral strip blades made of double layer or three layer, the outer spiral material from two side to the central pool, inner spiral material from the central to both sides, can make the material more vortices in the flow, speed up the mixing speed, improve the mixing uniformity; The belt pulley is used to drive the cycloid reducer. Compared with the large torque of the gear reducer, the elastic connection of the belt transmission has the advantage of protecting the transmission parts when overloading.

The working principle of

Horizontal mixer working principle of the zero gravity mixer horizontal cylinder body is equipped with biaxial reverse rotating blades, pulp lobe Angle will material along the axial and radial circulation riling, rapid mixing of material horizontal mixer performance characteristics of the speed reducer drive shaft rotation speed and the blade structure will make the material gravity decreases, with the lack of gravity, The difference of particle size and specific gravity of each material is ignored in the mixing process. The intense stirring movement shorts the time of mixing, making it faster and more efficient. Even if the material has the difference of specific gravity and particle size, it can achieve a good mixing effect under the rapid and violent tossing of staggered mixing blades.

Discharging way

Horizontal mixer discharging mode: powder material adopts pneumatic open door structure form, has the advantages of fast discharging, no residual, etc. High fineness material or semi-fluid material using manual butterfly valve or pneumatic butterfly valve, manual butterfly valve is economical and applicable, pneumatic butterfly valve of semi-fluid sealing is good, but the cost is higher than manual butterfly valve. In the case of heating or cooling, can be equipped with jacket. There are two heating modes: electric heating and thermal oil heating. Electric heating is convenient, but the heating speed is slow and the energy consumption is high. Thermal oil heating requires the configuration of oil pan, oil guide power, pipeline, large investment, but the heating speed is fast, low energy consumption. Cooling process can directly inject cooling water into the jacket, the jacket heat exchange area is large, cooling speed is fast. The motor and the stirring spindle are directly connected by cycloid reducer, which has the advantages of simple structure, high reliability and convenient maintenance.

using

Horizontal screw belt mixer is applied to the mixing of solid-solid (powder and powder) solid-slurry (powder and glue slurry) of pesticides, veterinary drugs, food, chemicals, biology, aquaculture, ceramics, refractory materials, plastics, compound fertilizer and so on. It is especially suitable for the mixing of viscous materials.