Working principle and structure of horizontal mixer

In the operation of 3d motion mixer, due to the multi-direction movement of the mixing barrel, all kinds of materials in the mixing process,

Speed up the flow and diffusion, at the same time to avoid the general mixing machine due to centrifugal force of material gravity segregation and accumulation phenomenon, mixing without dead Angle, can effectively ensure the best quality of mixed materials.

Structure of 3d motion mixer:

Three-dimensional motion mixer is composed of machine base, transmission system, electrical control system, multi-direction motion mechanism, mixing barrel and other components. The mixing barrel in direct contact with the material is made of stainless steel. The inner and outer walls of the barrel are polished.

Double cone mixer screen is cylindric, placed in the body, the material through the spiral conveying system, mixed with air flow, atomization into the net cylinder; Through the wind wheel blade in the net drum, the material is simultaneously subjected to centrifugal force and cyclone propulsion force, so as to make the material jet through the net, discharged from the outlet of fine material discharge, and the material that can not pass the net is discharged from the outlet of coarse material discharge along the wall of the net cylinder.

Double cone mixer rotation, revolution by a set of motor and cycloid gear reducer to complete, the use of two screw asymmetric mixing, so that the material mixing range is large, mixing is more uniform, mixing speed is fast, the proportion of the great gap, mixing ratio of large material mixing is more suitable, the machine and material contact part are stainless steel.

The characteristics of

1, the machine is small in size, light in weight, stable without vibration, no noise, good sealing performance, no dust, high efficiency;

2, the shell structure is novel, simple installation, convenient control;

3, can be single or multi-machine supporting use, long time continuous operation, safe and reliable;

4, the screen is washed by the whirlwind, can automatically clear the net;

5, the agglomerate material has the function of breaking again;

6, the new spherical bearing, prolong the service life;

7, the machine can be matched with pneumatic conveying system, directly into the air road, saving resources;

8. New design: the gas protection system of the double spiral mixer can transmit purified air to both ends of the equipment, which can effectively reduce the temperature produced by the equipment in the process of operation; The formation of gas isolation layer on the bearing, so as to prevent dust entry, effectively prolong the service life of the bearing, reduce maintenance frequency, improve work efficiency;

9, can be specially designed to meet special needs.