Horizontal feed mixer to add auxiliary equipment

What are the auxiliary equipment added to horizontal feed mixer?

Liquid addition -- spray liquid system;

◆ Shredder - a feed mechanical mixer can be equipped with one or two shredders, high-speed motion shredder can make some raw materials or granular feed in the process of mixing agglomerate or agglomeration phenomenon disappear, usually with both sides of the machine cover or barrel discharge valve;

Scraper device -- bucket body end and outer screw above the scraper, the purpose is to reduce the mixing dead zone;

◆ Interlayer -- interlayer design to add the user must provide medium, pressure, temperature parameters, and heating is through heat conduction oil, hot water or steam;

Load start protection device -- hydraulic coupling;

Electric control box -- feed machine manufacturers usually do not have electric control box, most of them are optional according to the needs of users;

Vacuum operation -- the equipment can be designed for vacuum operation or vacuum suction;

◆ Speed: single speed, double speed, frequency control or stepless speed control can be selected.

Tips: The motor of the drive part of the complete feed unit can use ordinary motor, explosion-proof motor, two-speed motor and frequency conversion motor. The connection mode is that the motor, reducer and mixer are directly connected, and the chain or belt transmission or cycloid pin wheel connection can also be used.

According to the design principle, the gap between the spiral belt and the shell in the spiral belt mixer can be 4-10 mm, and the materials can be driven to participate in the mixing by friction force. However, due to the different particle size and friction coefficient of materials, the mixing time of various components of materials is not the same, resulting in uneven product.