新闻资讯
current position: Home > News Center > Industry information

Horizontal mixer

2022-01-21 17:22:30
times

Horizontal screw belt mixer is composed of a U-shaped horizontal cylinder, mixing shaft, spiral blade, transmission parts and so on. The shaft is composed of two or three layers of screw belt inside and outside. Stirring shaft rotation, make internal and external spiral belt turning on a wide range, the screw conveyer, the material from the central to the campaign, the spiral belt will material from two side to the central pool, back and forth of material mixing, another part of the material under the spiral belt drive, along the axial radial motion, thus forming the convective circulation, which makes the material get rapid mixing in a relatively short time.


Features:


1. The whole machine structure is compact and the loading coefficient is large. The loading capacity (loading coefficient) of the equipment is usually more than 70%. The device occupies a small space and working area, easy to clean, meet each batch, each shift timely, convenient, fast cleaning of the equipment inside, without leaving dead Angle, can get uniform mixing in a very short time.



2, high mixing uniformity: can make 1:10000 times ratio of materials evenly mixed, especially for the specific gravity of the larger material mixing more obvious advantages.



3, mixing speed, high efficiency: usually each batch of material mixing is generally in 1-10 minutes to fully achieve the full mixing, than other mixer efficiency 6-10 times or higher. Fast discharging, convenient.


4, material contact is made of high quality stainless steel production and processing, good finish, easy operation and maintenance, in line with GMP requirements.



5, by the motor through the triangle belt transmission reducer drive mixing slurry, speed according to the quality of the material to get a variety of speed.



6, discharging: manual and pneumatic two, directly discharging under the groove (a variety of valves for choice, embedded valve, gate valve, disc valve, ball valve, pulley valve, electric, pneumatic, manual operation can be)



7, mixing movement direction can be positive and negative operation, mixing time and intermediate residence time can be set according to the quality of the material.



8, stirring shaft and slurry are made of stainless steel, slurry is spiral belt shape.



9, meet the vacuum feeding, dust-free discharging, avoid the dust flying in the whole feeding, mixing, discharging process.



10. The mixing process is mild and basically does not destroy the original state of the material.



11, no pollution to the material phenomenon: the stirring mechanism of the equipment is integral, safe and reliable, all edges and corners of the weld smooth transition, easy to clean; Lubrication parts are outside the barrel, no oil drops and abrasive material into the material, can be sealed operation, isolated dust in the air into the material.


12, low requirements for the plant: the equipment is horizontal, and various forms of driving device and discharging position can be arbitrarily selected, not restricted by the height of the plant, the area of the plant.


13, the equipment is stable and reliable operation, less wearing parts, long service life, convenient maintenance and simple operation.



Screw mixer available from the menu


Liquid addition -- spray system.


◆ Shredder - high-speed shredder can make some materials in the process of mixing agglomerate or agglomeration phenomenon disappear. One equipment can be equipped with one or two shredders, which can be arranged on both sides of the discharge valve of the machine cover or barrel body.


Scraper device: the end of the barrel body and the outer screw are equipped with scraper to reduce the mixing dead zone.


◆ Interlayer -- Interlayer can be heated by heat conduction oil, hot water or steam. Users must provide medium, pressure and temperature parameters.


Vacuum operation -- the equipment can be designed for vacuum operation or vacuum suction.


Load start protection device -- hydraulic coupling.


◆ Electric control box -- usually no electric control box, when the user needs to be equipped.


◆ Speed: single speed, double speed, frequency control or stepless speed control can be selected.


◆ Material: carbon steel, 304SUS, 316L stainless steel optional.



Tags

Recently Viewed:

Contact us

Shanghai Huasan Powder Equipment Co., LTD

Contact person: Manager Zhu

Tel: 021-57460338/57460358/57468812

Mobile phone: 13818804871/18017628352

Fax: 021-57463615

Email:sales@huasanpowder.com

Address: No.33 puzhuang Road, Zhuanghang European Industrial Park, Fengxian District, Shanghai